Relations between Rotogravure Cylinder and Engraving Machine

Relations between Rotogravure Cylinder and Engraving Machine

The relationship between the rotogravure cylinder and engraving machine is one that cannot be separated. Both have aspects that relate to each other if you are using both. If you are in the printing industry and you have the two, you need to get a few things correct.

The relationship between the two is all about what needs to use them together. For the engraving machine, you need to have certain things to engrave a certain rotogravure cylinder. Similarly, if you have an engraving machine, you need to get a cylinder that matches it.

There are so many factors you need to put into consideration, and that’s what we are going to look for. These are areas where there is a lot of relationship between rotogravure cylinder and engraving machine:

The Physical Size

Engraving machines are designed to handle various sizes. In this case, both the length and the diameter of the rotogravure cylinder matter. These machines have the maximum and minimum sizes that they handle. Therefore, you need to be very careful when buying a rotogravure cylinder if you already have an engraving machine.

Make sure that the size matches the limits that the machine offers. The size should not be too large or too small because it will make it impossible to engrave. Therefore, consider the issue size carefully.

Cylinder Weight

The weight of the cylinder is another important factor to consider. The engraving machines you find on the market are designed to handle certain weights. It has a maximum of 50kg load, then you cannot put a cylinder with more weight. This is because you will be exposing the machine to damages due to overload.

The result of using a too heavy cylinder will be a high rate of wear and tear. So be very careful on the issue of weight because it can damage your engraving machine.

Engraving Beam

If you already have invested in an engraving machine, you need to get a rotogravure cylinder that matches its settings. A good example is beam strength. It usually comes in a range of settings but also with a limit.

The rotogravure cylinder materials should fit in the ranges provided to engrave without damages. If you use steel material settings on an aluminum cylinder means that it will get damaged. That’s why the strength of the laser engraving beam is an important factor to consider.