Monthly Archives: July 2021

Relations between Rotogravure Cylinder and Engraving Machine

Relations between Rotogravure Cylinder and Engraving Machine

The relationship between the rotogravure cylinder and engraving machine is one that cannot be separated. Both have aspects that relate to each other if you are using both. If you are in the printing industry and you have the two, you need to get a few things correct.

The relationship between the two is all about what needs to use them together. For the engraving machine, you need to have certain things to engrave a certain rotogravure cylinder. Similarly, if you have an engraving machine, you need to get a cylinder that matches it.

There are so many factors you need to put into consideration, and that’s what we are going to look for. These are areas where there is a lot of relationship between rotogravure cylinder and engraving machine:

The Physical Size

Engraving machines are designed to handle various sizes. In this case, both the length and the diameter of the rotogravure cylinder matter. These machines have the maximum and minimum sizes that they handle. Therefore, you need to be very careful when buying a rotogravure cylinder if you already have an engraving machine.

Make sure that the size matches the limits that the machine offers. The size should not be too large or too small because it will make it impossible to engrave. Therefore, consider the issue size carefully.

Cylinder Weight

The weight of the cylinder is another important factor to consider. The engraving machines you find on the market are designed to handle certain weights. It has a maximum of 50kg load, then you cannot put a cylinder with more weight. This is because you will be exposing the machine to damages due to overload.

The result of using a too heavy cylinder will be a high rate of wear and tear. So be very careful on the issue of weight because it can damage your engraving machine.

Engraving Beam

If you already have invested in an engraving machine, you need to get a rotogravure cylinder that matches its settings. A good example is beam strength. It usually comes in a range of settings but also with a limit.

The rotogravure cylinder materials should fit in the ranges provided to engrave without damages. If you use steel material settings on an aluminum cylinder means that it will get damaged. That’s why the strength of the laser engraving beam is an important factor to consider.

Steps To Selecting A Good Cold Forging Supplier

Steps To Selecting A Good Cold Forging Supplier

People will say a lot about the best cold forging suppliers, but they forget the steps that can help you get them. Just looking for the size and the best brands in the market is not enough. There are steps that you need to consider if you want to get the best cold forging supplier.

Though there are many good suppliers like Cold Forging China (you can go here for the website) that you can buy from. But you need to be very well prepared to ensure that you are placing the right order and to the right supplier. Here steps for selecting cold forging supplier:

What Do You Need

The first thing that you need to establish is the kind of forgings that you need. This is one step for choosing suppliers that most people get wrong. Whether you need gears, cutting blades, or even bits, you need to know what works for your condition before buying. This should always be the first thing.

Do You Need Original or Other Sources

The second thing that you need to consider is whether you need to originals or not. If you are buying replacement parts for your machine, there are original parts and also OEMs and aftermarkets. In all cases, there are manufacturers that offer these varieties. You need to ensure that you have gotten the best for your condition.

What’s The Budget

How much are you planning to invest in forging? This is a question that you need to ask before going to the market for shopping. Make sure that you have the right budget that can buy quality parts for the condition you will be working. Make sure that the budget is not too small, or you might have a problem with getting quality.

When Do You Need the Parts?

The time that you need to be supplied with forging is another important factor to consider. Make sure that you have assessed your needs first. If you have downtime that you would like fixed immediately, then you need to consider dealing with an aftermarket supplier or the supplier near you.

Who Has the Best Quality?

Always go for the manufacturer that offers the best quality depending on the condition that you want to on. This is an important factor to consider because it determines the value for money that you get from the forgings. Choose carefully to ensure that you have the best quality cold forged products.