One of the things that you need to know when buying a laser engraving machine is that one time, it will be too old to work, and you will need to replace it. This is a very hard thing to even think of considering the amount of money you have spent on it. But when is the right time to replace your machine?

In most cases, the laser engraving machine manufacturers provide details of the lifespan of the machine. But the provided time is, most of the time, too long, and not many machines reach. So, here are signs that you might need to change your laser engraving machine:

Approaching Lifespan

One of the signs indicating that it’s time to change your laser engraving machine is the lifespan. In most cases, laser engraving machine manufacturers provide the useful life of the machine. If the machine was expected to last for 10 years, then make sure that you are not extending this time. This is because most of the machines experience an accelerated rate of wear and tear after this period.

Reducing Productivity

How was the machine producing when it was new? It is important that you keep track of your laser engraving machine productivity. This is a very important factor that will help you identify when your machine is growing old and inefficient. If the machine was engraving a certain number of items for a day, but the number is reducing, productivity is going down. The problem could be a weak laser beam. It’s a sign that you might need to replace the machine.

Increasing Running Cost

When the machine is pretty new, you will notice that the running cost is pretty low. But you will notice that as the days go by, you will start seeing an increment in the cost of running the machine. However, with maintenance, the cost may come down. But if the running cost continues to increase even with repairs, then you need to consider making a replacement.

Frequent Repairs

The other sign that you might need to replace your laser engraving machine is the increased number of repairs. Repairs are normal, but if they are too frequent, then that’s a case of the worn-down machine. So, you might need to make a replacement of the machine. Otherwise, you might end up spending a lot of money on a wreck.